Welcome To Our Custom Work

• Includes tenon threading, chamber reaming and counterbore if necessary.
• Barrel is indicated to within .0002" in proprietary fixturing prior to any work being done. Chamber is cut to nominal SAAMI headspace, honed, and inspected using the supplied action. Class 3A tenon threads are single point cut for a perfect connection to the barrel. 
• ***Price is for Remington 700 style actions. Actions requiring additional machine work for extractor relief, etc., will be subject to additional fees. Barrel will

• Single point cut class 3A muzzle threads to customer specified thread pitch and diameter. An 11 degree target crown is standard.

• Single point cut class 3A muzzle threads to customer specified thread pitch and diameter. An 11 degree target crown is standard.
• Custom stainless steel 3-port brake machined for proper timing, fit to barrel outside diameter. 
• Muzzle brake bored to customer's caliber for maximum precision and effectiveness. 

• Thread shoulder or brake is single point cut for proper brake timing without the use of shims or spacers for a seamless fit. 
• Muzzle brake bored to customer's caliber for maximum precision and effectiveness. 
• Price of brake and threading not inlcuded. 

• Barrel will be indicated concentric to its bore to within .0002", 11 degree target crown cut unless otherwise requested by customer. 

• Bolt and barrel fluting now available!

Our standard rate for custom projects.

• Barreled action degreased, critical areas masked and plugged for protection and all parts to be painted media blasted with 100 grit aluminum oxide. Parts are HVLP sprayed and cured to Cerakote specification and inspected for quality. Single color only. 

• Single color. Custom mixed colors available for all cerakote orders!!!

• Single color. Price may increase if substantial disassembly is required. 

• Up to three colors, several patterns available as well as free-hand airbrushed patterns. Price may increase if substantial disassembly is required. 

• Single color, epoxy based paint or Cerakote depending on the stock and customer needs. 

• High polish finish on desired metal parts. Price varies. 

• Prepare and full epoxy bed on custom machined aluminum pillars for a stress free stock / action interface. The best there is for a precision weapon system.  Edges mill trimmed for appearance. 

• Prepare and full epoxy bed on custom machined aluminum pillars for a stress free stock / action interface. The best there is for a precision weapon system.  Edges mill trimmed for appearance. 
• Barrel can be fully bedded, partially bedded, or completely free floating. 

• Price varies according to the extent of the repair. 

• Full armorer breakdown of your pistol, cleaned in an ultrasonic cleaner, air dried, properly lubricated, air dried and function tested. 

• Full armorer breakdown of your rifle, cleaned in an ultrasonic cleaner, air dried, properly lubricated, air dried and function tested. 

• Price varies according to extent of install. 

• Scope based / rings installed and torqued to spec. 
• Scope installed level and square to receiver. 
• Eye relief set to customer spec.